Between 50% and 70% of hurricane induced losses are caused by roof failures and water Intrusion through the roof after the roof covering fails. So what can be done to reduce hurricane-induced losses caused by roof failures and water intrusion in both new and existing wood roof structures?  Install FoamSeal Hurricane Adhesive!

FoamSeal Hurricane Adhesive is a Moisture Sealing Foamed Polyurethane Sheathing Adhesive which is spray applied from inside the attic to the underside of the roof structure. The product is applied to the truss (or rafter) sheathing joints and to the sheathing seams. Foamseal can be applied to both new construction and existing roof structures.

The use of FoamSeal Hurricane Adhesive is a cost-effective method of reducing wind and water losses associated with hurricanes and other high wind and rain events.

FoamSeal Hurricane Adhesive strengthens the roof 2 to 4 times over nails alone and can reduce water intrusion by approximately 99% if the roof covering fails.

When applied in accordance with the recommendations of the manufacturer, losses can be reduced up to 50% in residential structures. Almost any roof structure consisting of wood framing members and OSB (Oriented Strand Board) or Plywood is a candidate for the application of FoamSeal Hurricane Adhesive.

The patented FoamSeal Hurricane Adhesive Application Method is a cost-effective method of reducing wind and water losses associated with hurricanes, high wind and rain events. FoamSeal Hurricane Adhesive System is a polyurethane adhesive that can be applied to both existing and new construction roofs. The adhesive is applied at the truss joints and sheathing seams by a certified applicator. The exterior of the roof is not disturbed during application.

Find out more about the FoamSeal product by checking our our Product Testing Information: