Foam Seal America
Install Process

Home
About Us
Background
Roof Failure
Test Data
Uplift Resistance
Water Intrusion
Install Process
Why FoamSeal?
Comparison
Dealer Opportunity
Dealer Application
Contact Us
Site Map
Foam Seal America
561-951-1976
Contact Us Today!
Florida Product Approval FL #15476
 

 
Other Hurricane Protection Companies
 
 
 
 
 
You are visitor number 

Quote

Visit our Contact Us page to have a local authorized Foam Seal SF2100 dealer contact you for a free price quote. Our dealers are all highly trained and individually certified to assure the highest quality for your Foam Seal installation. To become a dealer there are extensive product classes, background checks and installation test, that every company owner and applicator must complete to be authorized to provide our product.

Pricing

We currently have dealers that cover most of the hurricane prone areas of the country. This is a relatively new form of protection and we are continuously trying to expand the number of dealers to effectively cover the millions of vulnerable homes in need of this roof strengthening product. Depending on the homeowners location Foam Seal will range from about $1.60 to $1.70 per square foot of roof covering for most at areas.

Installation

The application of Foam Seal Hurricane Adhesive takes approximately two hours per 1,000 square feet of roof and does not require any occupants to be disturbed during the process. A mobile unit, much like a carpet cleaning truck, pulls up to the house, tarps are laid out and the hoses are taken into the attic. A certified applicator then sprays the SF2100 Hurricane Adhesive in a continuous bead throughout the connections of the roof truss to the roof sheathing and along all seams where the sheathing butts together. Applied from inside the attic the Foam Seal product does not affect the exterior look of the roof.

Product

The Foam Seal SF2100 Hurricane Adhesive is a 1 to 1 ratio polyurethane adhesive. It has been specifically designed for bonding sheathing to roof trusses. The system is packaged in two 55-gallon steel drums. It consists of two parts; the A (iso) side and the B (resin) side. Sprayed on as a liquid it then quickly hardens and bonds into the roofs structure creating a much stronger water-tight barrier then standard nails alone. Where nails fail to keep roofs intact, Foam Seal Hurricane Adhesive helps your roof stay in place by increasing uplift resistance up to five times stronger then current codes.
 

Play Demo Videos

Water Barrier
 
Roof Strength
 
Rain Damage
 
Full Length
 
Florida Building Code Product Approval Test
 

Articles and News
 
Safety Warning Bulletin
 
Not Ready to Re-roof Article
 
Spray Foam Magazine Article

This website is
brought to you
by
Gary Noto
 
Back Next  

Home About Us Background Roof Failure Test Data Uplift Resistance Water Intrusion Install Process Why FoamSeal? Comparison Dealer Opportunity Dealer Application Contact Us Site Map

Updated:  09/19/2013

Copyright 2010 Foam Seal Hurricane Adhesives - All rights reserved.